IEC 60529 IPX7 Temporary Immersion Water Ingress Testing Equipment
Complied Standards & Clauses
IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX7.
Equipment Overview
Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc.
Structure: The test chamber is made of stainless-steel frame, and transparent transparent thickened tempered glass. The basket lifting is driven by electric hoist, which is convenient for operation.
Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under temporary immersion in water at degree IPX7.
Principle: By controlling the depth of the sample in the water to achieve a standard equivalent pressure, to produce water pressure across the entire surface of the specimen enclosure.
Use Environment:
Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting, the ground needs to be flat, and the water intake and drainage function should be good.
Water source: clean water or tap water without impurities, equipped with water cleaning filter.
Technical Parameters
| Control & Operation | Push-button operation |
| Chamber Size | Inner chamber: WDH=800×800mm×1200mm Outer chamber: WDH=860×860mm×1800mm Or can be customized |
| Highest Water Depth | 1200mm, with a scale, the resolution of scale is 1mm Or can be customized |
| Basket Size | Stainless steel basket: WD=500×500mm |
| Lifting Control | Driven by electric hoist |
| Test Duration | 30min, manually controlled |
| Material | Stainless steel frame, tempered glass |
Product Tags:
|
|
IPX7 Water Ingress Protection Test Equipment IEC 60529 Temporary Immersion Images
|
