Home > EVSE Testing Equipment >

EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N

Product Categories

Electric Vehicle Testing Equipment [31]
EVSE Testing Equipment [26]
EV Connector Testing Equipment [87]
EV Battery Testing Equipment [49]
Walk In Environmental Test Chamber [31]
Environmental Test Chamber [52]
Temperature Humidity Test Chamber [26]
Water Ingress Testing Equipment [41]
Flammability Testing Equipment [20]
Electrical Safety Testing Equipment [25]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N

Name: EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N
Brand: Sinuo
Price: 1 USD

China EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N wholesale

Brand Name : Sinuo

Model Number : SNQC1010

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Payment Terms : T/T

Supply Ability : 10 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Export packing

Force range : 5000N,11000N

Test station : Single station

Drive over stroke : 0~2.0m

Drive over speed : (8±2)km/h

Drive over tire pressure : (220±10) kPa

Drive over method : Linear motor

Control method : PLC

Display method : 15" touch screen

Contact Now

EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N

Complied Standards & Clauses

It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, IEC 61851, etc.

Product Overview

The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle unless it is provided with a cable management system that prevents the accessory from being left on the ground.

Accessories wired with the minimum size cable of a type recommended by the manufacturer shall be placed on a concrete floor in any normal position of rest. A crushing force of (5000±250) N or (11000±550) N shall be applied by a conventional automotive tire, P225/75R15, or an equivalent tire suitable for the load, mounted on a steel rim and inflated to a pressure of (2.2±0.1) bar. The wheel is to be rolled over the vehicle connector or plug at a speed of (8±2) km/h. The accessory is to be oriented in a natural resting position before applying the force in a different direction for each sample. The accessory under test shall be held or blocked in a fixed position so that it does not move substantially during the application of the applied force. In no case is the force to be applied to the projecting pins.

Technical Parameters

Test station	Single station
Equipment placement mode	Floor standing
PLC control system	The PLC control system shall be equipped with an at least 15" touch screen display. The PLC control system shall be in English. The PLC control system shall be capable to record and display the test speed and force. Test force, can be selected between load A and load B. The PLC controller shall come with emergency stop button and 1 main switch.
Operation mode	Manual or program-controlled operation, can be selected
Drive over power system	Motor plus worm gear acceleration and deceleration
Drive over stroke	0~2.0m
Load Carrying	A. Crushing force (5000±250) N B. Crushing force (11000±550) N
Force sensor	Will be provided with an external precision force sensor to measure the total force from tire, load, upper and lower sliding frame, power system and counter weight before testing.
Drive over speed	(8±2)km/h, speed adjustable
Drive over method	It is driven by a linear motor module to simulate the forward and backward reciprocating motion of rolling tires. This simulates the damage caused by accidental crushing of the plug of the charging pile when the car is moving forward or reversing in reality.
Drive over force adjustment	Using weights, the force range is adjustable from 5000N-11000N, and the weights are loaded and unloaded by cantilever crane.
Drive over tires	1. Equipped with one P225/75 R15 tire and one matching wheel hub, a set of tire inflation devices (inflation interface and air pressure gauge, for 5000N test) Equipped with 11000N load-bearing tire and a matching wheel hub. 3. The wheel load shall be mounted on a steel rim
Drive over tire pressure	(220±10) kPa
Load bearing base plate	Base plate with cement/concrete floor, can be equipped with sample fixing clamp.
Deceleration method	Our company has designed a braking mechanism to prevent rigid collisions.
Safety protection	The whole machine is equipped with a protective fence to prevent the wheels from accidentally deflecting and prevent mechanical injuries to personnel. With leakage protection switch. With motor overload protection.
Usage environment	Power supply: AC400V+10 % and – 6%, 50Hz ± 1%. Overall dimensions: approximately W4700D1300H3000mm; weight: approximately 2400kg

Details

EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N

Product Tags:

11000N EVSE Testing Equipment

Electrical Vehicle Inlet EVSE Testing Equipment

EVSE Testing Equipment Electrical Vehicle Inlet Drive Over Test Machine 11000N Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!